SHIELDskin XTREME™ White Non-Sterile Nitrile 300 DI Cleanroom Gloves – 300 mm, PPE Category III

SHIELDskin XTREME™ White Nitrile 300 DI are non-sterile nitrile cleanroom gloves designed for basic contamination control in controlled and clean processing environments. The gloves are intended for industrial and cleanroom use where a balance between protection, comfort and contamination control is required.

The gloves are powder-free, single DI washed and manufactured from nitrile synthetic rubber. They are ambidextrous with textured fingertips and a beaded cuff, providing reliable handling and ease of use. Clean processing, including multiple post-leaching steps and washing in deionised water, ensures controlled particle and extractable levels suitable for cleanroom applications.

Key Features

– Non-sterile nitrile cleanroom gloves for basic contamination control
– Standard length 300 mm (11.8”)
– Single DI washed and clean processed
– Ambidextrous design with textured fingertips and beaded cuff
– Powder-free and latex-free
– uniSHIELD™ single-wall technology balancing comfort and protection
– PPE Category III (Complex Design) according to Regulation (EU) 2016/425

Cleanliness and Chemical Properties

– Particle count (≥0.5 µm): <3,000 particles/cm² (typical 2,300 particles/cm²)
– Controlled ionic extractables tested according to IEST-RP-CC005.4
– NVR maximum 25 µg/cm²
– Silicone-free with non-detectable amide and DOP levels
– ESD tested according to EN 1149-1/2/3 & 5

Protection Performance

– Tested against micro-organisms according to ISO 374-2
– Virus protection tested according to ISO 374-5 and ISO 16604:2004 Procedure B
– Chemical protection performance Type B (KPT) according to ISO 374-1
– Tested for permeation by chemotherapy drugs according to ASTM D6978-05

Physical Properties

– Finger thickness 0.15 mm (5.9 mil)
– Palm thickness 0.13 mm (5.1 mil)
– Cuff thickness 0.10 mm (3.9 mil)
– Typical length 300 mm
– AQL <1.5

Standards and Certifications

– PPE Category III, Regulation (EU) 2016/425
– CE 2797 and UKCA 0086 certified
– ISO 21420, ISO 374-1 Type B, ISO 374-2, ISO 374-4, ISO 374-5
– EN 16523-1 and ISO 16604 Procedure B
– EN 455-1/2/3/4
– ASTM D412, ASTM D6978 and IEST-RP-CC005.4
– ISO 9001, ISO 13485 and ISO 14001 manufacturing compliance

Applications

– Cleanroom and controlled industrial environments
– Pharmaceutical, biotechnology and laboratory operations
– General clean processing and contamination control tasks

Important Notice

– For cleanroom and industrial use only
– Not intended for sterile applications
– Not a medical device

View the technical data sheet by clicking HERE